Reset Router

1. Power on the router.
2. Locate reset hole (It is usually appears back of the router, beside the power on/off switch).
3. Push a pin or paper clip into the reset hole and hold it for 10 seconds (all LED lights will be flashed).
4. Release the pin or paper clip from the hole.
5. Wait for 2 to 3 minutes to complete the reset process. Once it is completed the router LED lights goes to steady mode.

Lights Indicator

• Power    –  Green   –              Solid
• LAN       –  Green   –              Flash when traffic is going through mode
• DSL        –  Green   –              Solid
• Internet –  Green   –              Flash when traffic is going through modem